Fuel+Oil Pressure Mechanical Gauge Test Tool Set for Ford Powerstroke 6.0L 7.3L

Description

Description:
100% brand new, Never been tried or installed
The tool can test fuel or low side oil pressure. It comes with all the fittings needed for both 6.0 & 7.3 engines.
The tool is primarily designed to test fuel pressure while driving.
This is a must, to accurately see the pressure drop with a load on the engine.
No instructions included
Professional installation is highly recommended
Materials:
100 psi liquid filled gauge (High quality stainless steel body with added rubber boot)
300 psi Fuel & Oil rated hose
All jic steel adapters
Lever action suction cup, makes a handy gauge holster
Application:
Fuel+Oil Pressure Mechanical Gauge Test Tool Set for Ford Powerstroke 6.0L 7.3L
Description:
100% brand new, Never been tried or installed
The tool can test fuel or low side oil pressure. It comes with all the fittings needed for both 6.0 & 7.3 engines.
The tool is primarily designed to test fuel pressure while driving.
This is a must, to accurately see the pressure drop with a load on the engine.
No instructions included
Professional installation is highly recommended
Materials:
100 psi liquid filled gauge (High quality stainless steel body with added rubber boot)
300 psi Fuel & Oil rated hose
All jic steel adapters
Lever action suction cup, makes a handy gauge holster
Application:
For a 6.0 Fuel pressure test, with an allen wrench remove the plug located at the bottom front of the fuel filter housing. Then install the 1/4" jic x M12-1.5 adapter.
To test oil pressure on a 6.0, you would remove the single wire, oil pressure sensor, and utilize that port with the 1/4" jic x #4 orb adapter. (Sensor is located on top of the oil cooler housing in front of the turbo)
7.3 fuel pressure test, there's 2 plugs on the back of the fuel filter housing. Upper driver side is the pre-filter port, Lower passenger side is the post filter port. (Most people use the pre-filter port because its easier to get to) Then you would install the 1/4" jic x #4 orb adapter.
7.3 oil pressure test, there are 2 options. You can remove the "single wire"-oil pressure sensor located on top front of engine, and install the 1/4" jic x #4 orb adapter. Or, located at the oil filter head there is a 1/8" npt plug you can remove. Then install the 1/4" jic x 1/8" npt adapter.
This tool can also potentially work on many other engines, including gas engines. If the engine has a 7/16-20 thread test port at the fuel rail, just remove the shrader valve before connecting the tool.
Tips:
After any fuel pressure test, you have the option to leave the adapter installed, and cap it with one of the provided jic caps. The jic plug is for to plug off the end of the tool for storage.
If you have any questions, just send us a message.
Package including:
Assembled pressure test hose and gauge set;
Needed fittings/adapters.
As shown in the Picture Show
Item Specifics
Brand
wzho3115
Manufacturer Part Number
FW49302
Engine Type
Diesel
Accessories
Fittings, Hoses
Vehicle Type
Heavy Duty/Commercial, Passenger Vehicle
Maximum PSI
100 PSI
Warranty
Yes
Features
Dual Scale Range, Gauge Hook
About us
Please check our
eBay Store
for the parts you need!
We will ship orders ASAP!
We are professional High-Performance racing parts manufacture located in City of Industry, California.
All our products come with 3 months Manufacture Warranty.
Dealers are welcome to contact us for customized racing parts and wholesale discount!
Payment
We will accept eBay Payment as the method of payment.
Shipping
Notice: The Guaranteed Date is automatically generated and displayed by ebay. We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.
We ship all of orders within1-3 business days after payment received on Monday to Friday.
Orders placed on Friday and weekend will be shipped on next Monday.
All orders will ship via USPS First Class/ Priority Mail or Fedex.
Domestic orders usually takes 3-10 days to arrive.
Returns
30 day Money-Back Guarantee
If anyway you are unsatisfied with the purchase or item arriving damage/defective and it is within 30 days of receiving the item.
You can return the UNUSED item back to us for a full refund.
Contact Information
Please use the "Ask a Question" from above to contact us.
Office Hour: Monday-Friday: 8:30am to 5:30pm. PST
Shop Category
Store Home
Timing Components
◈  Timing Chain Kit
◈  Timing Belt Water Pump Kit
◈  Control Solenoid Valve
Exhaust Systems
◈  V Clamps
◈  Exhaust Wraps
Gaskets
◈  Cyl. Head & Valve Cover Gasket
Suspension & Steering
◈  Shocks & Struts
◈  Coil Springs
◈  Lift Kits & Parts
Chassis Parts
◈  Control Arms & Parts
◈  Control Arms & Parts-OEM
◈  Sway Bars
◈  Caster/Camber Kits
Cooling Systems
◈  Fans & Kits
◈  Radiators & Parts
◈  Hoses & Clamps
Exterior
◈  Grilles
◈  Hoods
◈  Mouldings & Trim
Engines & Components
◈  Motor Mounts
Brakes & Brake Parts
◈  Air Dryers
Transmission & Drivetrain
◈  Other
Intake Systems
◈  Air Intake Systems
◈  Cylinder Heads & Parts
Hangers, Clamps & Flanges
◈  T Clamps
◈  Butt Joint Clamp
◈  Spring Clips / Clamps
Automotive Repair Kits
◈  Other Automotive Tools & Suppl
◈  Diagnostic Service Tools
Air Intake & Fuel Delivery
◈  Fuel Inject. Controls & Parts
Turbos, Nitrous, Superchargers
◈  Turbo Chargers & Parts
Other Parts
◈  Go Kart Parts
◈  Connectors & Terminals
◈  Valve Stems & Caps
◈  Motorcycle Parts
Silicone Hose
Other
Hot Item
OverHead Console w/Down Light for 09-11 Mazda 6 w/Sunroof 3.7L GS4C-69-970D-75
USD 33.99
Aluminum Intake Manifold Coolant Adapter For Acura K Series Swap K20 K24
USD 25.59
Fuel+Oil Pressure Mechanical Gauge Test Tool Set for Ford Powerstroke 6.0L 7.3L
USD 53.87
New List Item
Fuel+Oil Pressure Mechanical Gauge Test Tool Set for Ford Powerstroke 6.0L 7.3L
USD 53.87
OverHead Console w/Down Light for 09-11 Mazda 6 w/Sunroof 3.7L GS4C-69-970D-75
USD 33.99
Aluminum Intake Manifold Coolant Adapter For Acura K Series Swap K20 K24
USD 25.59
Fuel+Oil Pressure Mechanical Gauge Test Tool Set for Ford Powerstroke 6.0L 7.3L
Description:
100% brand new, Never been tried or installed
The tool can test fuel or low side oil pressure. It comes with all the fittings needed for both 6.0 & 7.3 engines.
The tool is primarily designed to test fuel pressure while driving.
This is a must, to accurately see the pressure drop with a load on the engine.
No instructions included
Professional installation is highly recommended
Materials:
100 psi liquid filled gauge (High quality stainless steel body with added rubber boot)
300 psi Fuel & Oil rated hose
All jic steel adapters
Lever action suction cup, makes a handy gauge holster
Application:
For a 6.0 Fuel pressure test, with an allen wrench remove the plug located at the bottom front of the fuel filter housing. Then install the 1/4" jic x M12-1.5 adapter.
To test oil pressure on a 6.0, you would remove the single wire, oil pressure sensor, and utilize that port with the 1/4" jic x #4 orb adapter. (Sensor is located on top of the oil cooler housing in front of the turbo)
7.3 fuel pressure test, there's 2 plugs on the back of the fuel filter housing. Upper driver side is the pre-filter port, Lower passenger side is the post filter port. (Most people use the pre-filter port because its easier to get to) Then you would install the 1/4" jic x #4 orb adapter.
7.3 oil pressure test, there are 2 options. You can remove the "single wire"-oil pressure sensor located on top front of engine, and install the 1/4" jic x #4 orb adapter. Or, located at the oil filter head there is a 1/8" npt plug you can remove. Then install the 1/4" jic x 1/8" npt adapter.
This tool can also potentially work on many other engines, including gas engines. If the engine has a 7/16-20 thread test port at the fuel rail, just remove the shrader valve before connecting the tool.
Tips:
After any fuel pressure test, you have the option to leave the adapter installed, and cap it with one of the provided jic caps. The jic plug is for to plug off the end of the tool for storage.
If you have any questions, just send us a message.
Package including:
Assembled pressure test hose and gauge set;
Needed fittings/adapters.
As shown in the Picture Show
About us
Payment
Shipping
Returns
Contact Information
Please check our
eBay Store
for the parts you need!
We will ship orders ASAP!
We are professional High-Performance racing parts manufacture located in City of Industry, California.
All our products come with 3 months Manufacture Warranty.
Dealers are welcome to contact us for customized racing parts and wholesale discount!
We will accept eBay Payment as the method of payment.
Notice: The Guaranteed Date is automatically generated and displayed by ebay. We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.
We ship all of orders within1-3 business days after payment received on Monday to Friday.
Orders placed on Friday and weekend will be shipped on next Monday.
All orders will ship via USPS First Class/ Priority Mail or Fedex.
Domestic orders usually takes 3-10 days to arrive.
30 day Money-Back Guarantee
If anyway you are unsatisfied with the purchase or item arriving damage/defective and it is within 30 days of receiving the item.
You can return the UNUSED item back to us for a full refund.
Please use the "Ask a Question" from above to contact us.
Office Hour: Monday-Friday: 8:30am to 5:30pm. PST