Fuel Pressure Mechanical Gauge Test Tool Kit Fit Ford Powerstroke 6.0L 7.3L

Description

Description:
100% brand new, Never been tried or installed
The set is a tool for testing fuel or low side oil pressure while driving.
Fittings needed for 6.0L & 7.3L diesel engines are included.
The set is essential for accurately measuring the pressure drop when engine burdened with a load.
No instructions included
Professional installation is highly recommended
Materials Used:
300 PSI rated fuel & oil hose
100 PSI gauge, with quality stainless steel body & shatter-resistant rubber casing
Lever action suction cup for securing the gauge and easier reading
Needed JIC fittings/adapters
Application Details:
Fuel Pressure Mechanical Gauge Test Tool Kit Fit Ford Powerstroke 6.0L 7.3L
Description:
100% brand new, Never been tried or installed
The set is a tool for testing fuel or low side oil pressure while driving.
Fittings needed for 6.0L & 7.3L diesel engines are included.
The set is essential for accurately measuring the pressure drop when engine burdened with a load.
No instructions included
Professional installation is highly recommended
Materials Used:
300 PSI rated fuel & oil hose
100 PSI gauge, with quality stainless steel body & shatter-resistant rubber casing
Lever action suction cup for securing the gauge and easier reading
Needed JIC fittings/adapters
Application Details:
For a 6.0L fuel pressure test, use an allen wrench removing the plug located at the bottom front of the fuel filter housing, and then install the 1/4" JIC x M12-1.5 adapter;
For a 6.0L oil pressure test, please remove the “single wire” oil pressure sensor, and utilize that port with the 1/4" JIC x #4 orb adapter.(Sensor located on top of the oil cooler housing in front of the turbo)
For a 7.3L fuel pressure test, there’s two plugs on the back of the fuel filter housing. Upper driver side is the pre-filter port and lower passenger side is the post-filter port (Many people use the pre-filter port since it’s easier to reach), and then install the 1/4" JIC x #4 orb adapter.
There are two options applied when undertaking 7.3L oil pressure test. You may remove the “single wire” oil pressure sensor located on top front of engine, and then install the 1/4" JIC x #4 orb adapter. Or, you can remove the 1/8" NPT plug located at the oil filter head, and then install the 1/4" JIC x 1/8" NPT adapter;
The set may probably work on many other engines, including gas engines. If your engine has a 7/16"-20 thread test port at the fuel rail, just remove the shrader valve prior to mounting the tool.
Tips:
After any fuel pressure test, you may leave the adapter installed and cap it with the provided JIC cap. The JIC plug is used to block off the end of the tool for storage;
Any question please contact us and we'd love to help.
Package including:
Assembled pressure test hose and gauge set
Needed fittings/adapters
As shown in the Picture
Item Specifics
Brand
Unbranded
Manufacturer Part Number
Does Not Apply
Vehicle Type
Heavy Duty/Commercial
Accessories
Fittings
Maximum PSI
100 PSI
Engine Type
Diesel
Features
Dual Scale Range, Gauge Hook
UPC
Does not apply
Warranty
90 Day
Payment
We only accept
eBay payment
and other payments through eBay.
Credit Cards processed by eBay.
Shipping
USA customer's order will be shipped from our USA warehouse which located in California / New Jersey / Atlanta / Houston by UPS / Fedex / USPS within
1-3
business days.
Free Shipping
within the 48 Contiguous United States.
Extra Shipping Cost
for Alaska, Hawaii, Puerto Rico, P.O. Boxes and Military AFO / APO addresses.
Please make sure your address is the right address in eBay before payment.
All Friday orders will be shipped on next Monday morning.
Return
You can return your unused items back for exchange or refund within
60 days
.
Please contact us for return process before you return the item.
Feedback
Your feedback is
very important
to us!
Do not hesitate to contact us before leaving any neutral or negative feedback.
Contact Us
Please feel free to contact us by ebay message.
All messages will be replied within
one business day
.
DESCRIPTION
PAYMENT
SHIPPING
RETURN
CONTACT US
Hot Item
FOR TOYOTA 292 PCS FENDER DOOR HOOD BUMPER TRIM CLIPS BODY RETAINER +TOOL
USD 22.01
2" 50Ft Titanium Basalt Manifold Header Exhaust Pipe Heat Wrap +10 Ties Kit
USD 19.84
350Pcs Plastic Auto Body Push Pin Rivet Fastener Trim Moulding Clips Screwdriver
USD 16.08
Fit 99-07 Chevy GMC V8 4.8L/5.3L/6.0L 4" Cold Air Intake Kit+Heat Shield Black
USD 55.99
Cold Air Intake System/Kit+Heat Shield Red For 99-06 GMC/Chevy V8 4.8L/5.3L/6.0L
USD 56.65
New List Item
Fuel Filter Housing for 94-97 Ford F250 F350 E350 7.3L Powerstroke Diesel Trucks
USD 239.00
For Volvo VN VNL VNM 2004-2017 Truck Headlight Headlamp Pair Left Right Side
USD 270.00
Snorkel Kit For Toyota Tacoma 1996-2002 3rd 4RUNNER 1995-2004 1st Gen usa
USD 85.99
Fuel Filter Housing for 94-97 Ford F250 F350 E350 7.3L Powerstroke Diesel Trucks
USD 165.33
CP4 Disaster Prevention Bypass Kit 2011-2014 Ford 6.7L Powerstroke Diesel USA
USD 114.99
Excellent Delivery
Fuel Pressure Mechanical Gauge Test Tool Kit Fit Ford Powerstroke 6.0L 7.3L
Description:
100% brand new, Never been tried or installed
The set is a tool for testing fuel or low side oil pressure while driving.
Fittings needed for 6.0L & 7.3L diesel engines are included.
The set is essential for accurately measuring the pressure drop when engine burdened with a load.
No instructions included
Professional installation is highly recommended
Materials Used:
300 PSI rated fuel & oil hose
100 PSI gauge, with quality stainless steel body & shatter-resistant rubber casing
Lever action suction cup for securing the gauge and easier reading
Needed JIC fittings/adapters
Application Details:
For a 6.0L fuel pressure test, use an allen wrench removing the plug located at the bottom front of the fuel filter housing, and then install the 1/4" JIC x M12-1.5 adapter;
For a 6.0L oil pressure test, please remove the “single wire” oil pressure sensor, and utilize that port with the 1/4" JIC x #4 orb adapter.(Sensor located on top of the oil cooler housing in front of the turbo)
For a 7.3L fuel pressure test, there’s two plugs on the back of the fuel filter housing. Upper driver side is the pre-filter port and lower passenger side is the post-filter port (Many people use the pre-filter port since it’s easier to reach), and then install the 1/4" JIC x #4 orb adapter.
There are two options applied when undertaking 7.3L oil pressure test. You may remove the “single wire” oil pressure sensor located on top front of engine, and then install the 1/4" JIC x #4 orb adapter. Or, you can remove the 1/8" NPT plug located at the oil filter head, and then install the 1/4" JIC x 1/8" NPT adapter;
The set may probably work on many other engines, including gas engines. If your engine has a 7/16"-20 thread test port at the fuel rail, just remove the shrader valve prior to mounting the tool.
Tips:
After any fuel pressure test, you may leave the adapter installed and cap it with the provided JIC cap. The JIC plug is used to block off the end of the tool for storage;
Any question please contact us and we'd love to help.
Package including:
Assembled pressure test hose and gauge set
Needed fittings/adapters
As shown in the Picture
Payment
We only accept
eBay payment
and other payments through eBay.
Credit Cards processed by eBay.
Shipping
USA customer's order will be shipped from our USA warehouse which located in California / New Jersey / Atlanta / Houston by UPS / Fedex / USPS within
1-3
business days.
Free Shipping
within the 48 Contiguous United States.
Extra Shipping Cost
for Alaska, Hawaii, Puerto Rico, P.O. Boxes and Military AFO / APO addresses.
Please make sure your address is the right address in eBay before payment.
All Friday orders will be shipped on next Monday morning.
Return
You can return your unused items back for exchange or refund within
60 days
.
Please contact us for return process before you return the item.
Feedback
Your feedback is
very important
to us!
Do not hesitate to contact us before leaving any neutral or negative feedback.
Contact Us
Please feel free to contact us by ebay message.
All messages will be replied within
one business day
.