-40%

18pcs 394mil 29.06sqft Car Sound Deadener Insulation Mat Intensive Aluminum

$ 24.82

Availability: 100 in stock
  • Returns Accepted: Returns Accepted
  • Package Content: 18 x Heat Sound Deadener Insulation Mat,1 x Manual
  • California Prop 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov -
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Condition: New
  • Dimension: 50x30cm / 19.69''x11.81''(L*W)
  • Product Name: Heat Sound Deadener Insulation Mat
  • Color: Silver Tone
  • Manufacturer Part Number: Does Not Apply
  • Shell Color: Silver Tone
  • Thickness: 10mm / 0.39 inch / 394 mil
  • Net Weight: 1569g
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Material: Intensive Aluminum,Cotton
  • Total Coverage Area: 29.06 sqft
  • Brand: uxcell
  • Features: Easy to Cut

    Description

    Document
    Description:Made of Intensive Aluminum material for heat resistance.This material eliminates vibrations, reduces general noise and rattle of the vehicle allowing for higher comfort.Self adhesive sound dampening material,it is easy to install.It is desined in handy size which make it easier in terms of cutting.Block transmit sunlight and engine's heat to the cab, reduce air conditioning energy consumption.Specification:Color:  Silver ToneMaterial: Intensive Aluminum, CottonTotal Coverage Area: 29.06 sqftThickness: 10mm / 0.39 inch / 394 milSize: 50x30cm / 19.69''x11.81''(L*W)Installation:Decide what part you want to insulate first: car roof,car floor,car doors or a hood.Remove the remains of the factory insulation once you have dismantled the interior.Properly clean and degrease the surface prior to installation of mat.Measure the pre cleaned surface of the prospective spot that you are going to treat.Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper.When your sheet is ready to used,lay that down to the surface and let is glue.Flatten the sheet with hands to avoid air bubbles.Use a roller(not including) for rolling down the foil as a neat step.Installation Notices:Please clean the surface you want to paste.You could heat with a hair dryer to make it soft,then compacted by hand.If the room temperature is below 5 degrees Celsius first with lamp heating it until soft.It would be best to wear the gloves when working.Package Included:18 x Heat Sound Deadener Insulation Mat1 x Manual
    Shop Category
    Motorcycle Parts
    Car & Truck Parts
    Other
    New Arrival
    Hot Item
    18pcs 394mil 29.06sqft Car Sound Deadener Insulation Mat Intensive Aluminum
    Description:
    Made of Intensive Aluminum material for heat resistance.This material eliminates vibrations, reduces general noise and rattle of the vehicle allowing for higher comfort.
    Self adhesive sound dampening material,it is easy to install.
    It is desined in handy size which make it easier in terms of cutting.
    Block transmit sunlight and engine's heat to the cab, reduce air conditioning energy consumption.
    Specification:
    Color:  Silver Tone
    Material: Intensive Aluminum, Cotton
    Total Coverage Area: 29.06 sqft
    Thickness: 10mm / 0.39 inch / 394 mil
    Size: 50x30cm / 19.69''x11.81''(L*W)
    Installation:
    Decide what part you want to insulate first: car roof,car floor,car doors or a hood.
    Remove the remains of the factory insulation once you have dismantled the interior.Properly clean and degrease the surface prior to installation of mat.
    Measure the pre cleaned surface of the prospective spot that you are going to treat.
    Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper.When your sheet is ready to used,lay that down to the surface and let is glue.Flatten the sheet with hands to avoid air bubbles.Use a roller(not including) for rolling down the foil as a neat step.
    Installation Notices:
    Please clean the surface you want to paste.
    You could heat with a hair dryer to make it soft,then compacted by hand.If the room temperature is below 5 degrees Celsius first with lamp heating it until soft.
    It would be best to wear the gloves when working.
    Package Included:
    18 x Heat Sound Deadener Insulation Mat
    1 x Manual
    Item Specifics
    Brand
    uxcell
    Manufacturer Part Number
    Does Not Apply
    Color
    Silver Tone
    Features
    Easy to Cut
    Material
    Intensive Aluminum,Cotton
    Product Name
    Heat Sound Deadener Insulation Mat
    Shell Color
    Silver Tone
    Dimension
    50x30cm / 19.69''x11.81''(L*W)
    Package Content
    18 x Heat Sound Deadener Insulation Mat,1 x Manual
    upc
    747709248486
    Net Weight
    1569g
    You may also like
    About Us
    Shipping
    Feedback
    Payment
    Contact Us
    Tasharinacorp is based in United States, selling aftermarket automotive parts and accessories.
    We believe in FACTORY DIRECT purchases.
    Our mission is to deliver Lower Prices and Better Quality to consumers and distributors wherever, whenever.
    We strive to ensure that our products are reliable, updated and that our transactions are smooth and speedy. We are positioned to bring you the latest consumer automotive aftermarket parts and accessories globally and round the clock.
    We are proud to have served over 500,000 eBay buyers worldwide.
    International Buyers - Please Note:
    Taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges.
    Note that delivery times may vary, particularly during peak periods or in climate weather conditions.
    All items will be dispatched from our warehouse in Kentucky directly.
    We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery.
    All our items will be shipped to buyer's address, please confirm your address on eBay before you bid.
    We left positive feedback for you after receiving payment. Your feedback is very important for us, positive feedback and 5 Score DSR is highly appreciated.
    Please let us know before leaving any negative feedback or 1 point, 2 point low DSR or open any disputes on Paypal and Ebay, please give us the opportunity to resolve any problems and we will try our best to satisfy your needs.
    If any question, please feel free to contact us via 'Ask seller a question' ,We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately.Please allow 1-2 business days for us to response.
    Payment Methods:
    We ONLY accept bank transfer.
    We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
    Contact Us
    Please email us to resolve any problem before you leave any feedback to us. We will reply you via email ASAP, if no response for you within 48 hours, please check the spam / junk folder in your mail box.
    Descripción
    Política
    18pcs 394mil 29.06sqft Car Sound Deadener Insulation Mat Intensive Aluminum
    Description:
    Made of Intensive Aluminum material for heat resistance.This material eliminates vibrations, reduces general noise and rattle of the vehicle allowing for higher comfort.
    Self adhesive sound dampening material,it is easy to install.
    It is desined in handy size which make it easier in terms of cutting.
    Block transmit sunlight and engine's heat to the cab, reduce air conditioning energy consumption.
    Specification:
    Color:  Silver Tone
    Material: Intensive Aluminum, Cotton
    Total Coverage Area: 29.06 sqft
    Thickness: 10mm / 0.39 inch / 394 mil
    Size: 50x30cm / 19.69''x11.81''(L*W)
    Installation:
    Decide what part you want to insulate first: car roof,car floor,car doors or a hood.
    Remove the remains of the factory insulation once you have dismantled the interior.Properly clean and degrease the surface prior to installation of mat.
    Measure the pre cleaned surface of the prospective spot that you are going to treat.
    Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper.When your sheet is ready to used,lay that down to the surface and let is glue.Flatten the sheet with hands to avoid air bubbles.Use a roller(not including) for rolling down the foil as a neat step.
    Installation Notices:
    Please clean the surface you want to paste.
    You could heat with a hair dryer to make it soft,then compacted by hand.If the room temperature is below 5 degrees Celsius first with lamp heating it until soft.
    It would be best to wear the gloves when working.
    Package Included:
    18 x Heat Sound Deadener Insulation Mat
    1 x Manual
    Item Specifics
    Brand
    uxcell
    Manufacturer Part Number
    Does Not Apply
    Color
    Silver Tone
    Features
    Easy to Cut
    Material
    Intensive Aluminum,Cotton
    Product Name
    Heat Sound Deadener Insulation Mat
    Shell Color
    Silver Tone
    Dimension
    50x30cm / 19.69''x11.81''(L*W)
    Package Content
    18 x Heat Sound Deadener Insulation Mat,1 x Manual
    upc
    747709248486
    Net Weight
    1569g
    You may also like
    About Us
    Angstrom Autohaus is based in Hong Kong, our group comprises factories in Asia that manufacture OEM and aftermarket automotive parts and accessories.
    We believe in FACTORY DIRECT purchases.
    Our mission is to deliver Lower Prices and Better Quality to consumers and distributors wherever, whenever.
    We operate from a distribution center in Hong Kong, where we perform sourcing, quality control and fulfillment. We strive to ensure that our products are reliable, updated and that our transactions are smooth and speedy. We are positioned to bring you the latest consumer automotive aftermarket parts and accessories globally and round the clock.
    We are proud to have served over 500,000 ebay buyers worldwide.
    Shipping
    International Buyers - Please Note:
    Import duties, taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges.
    Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
    Note that delivery times may vary, particularly during peak periods or inclimate weather conditions.
    All items will be dispatched from our warehouse in China or Hong Kong directly.
    Due to Custom restrictions, we do not ship lighters to US
    We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery.
    All our items will be shipped to buyer's PayPal address, please confirm your address on PayPal before you bid.
    Feedback
    We left positive feedback for you after receiving payment. Your feedback is very important for us, positive feedback and 5 Score DSR is highly appreciated.
    Please let us know before leaving any negative feedback or 1 point, 2 point low DSR or open any disputes on Paypal and Ebay, please give us the opportunity to resolve any problems and we will try our best to satisfy your needs.
    If any question, please feel free to contact us via 'Ask seller a question' ,We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately.Please allow 1-2 business days for us to response.
    Payment
    Payment Methods:
    We ONLY accept Paypal.
    We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
    Contact Us
    Contact Us
    Please email us to resolve any problem before you leave any feedback to us. We will reply you via email ASAP, if no response for you within 48 hours, please check the spam / junk folder in your mail box.